Skip to content

How do I change my wi-fi name and password?

Your Belong modem comes with wi-fi capability allowing you to wirelessly connect multiple devices to the internet at once with a secure password. If you’d like to change your wi-fi network name (SSID) or password, you can do this when connected to your home network via Ethernet or wi-fi.

Note: Once changed, any devices that are currently connected (or were previously connected) will be removed from the network and will need to connect again using the new details.

How to change your wi-fi network name or password

Belong 4135 modem

The D W A 4135 is a flat rectangle with rounded corners. It sits upright on the thick, long edge, and is thinner at the top.

Make sure you’re connected via wi-fi or Ethernet, and the ‘Sync’ light is a solid green colour, then follow the steps below:

  1. On your device, open an internet browser and type 192.168.1.254 into the address bar. When prompted for the modem authentication username and password:

    1. Enter the username ‘admin’

    2. Enter the password which can be found on the back of the modem

  2. Click 'Sign in’

  3. From the home page select Wi-Fi

  4. On the Wi-Fi tab menu select Home

  5. Under the Wi-Fi radio band you wish to change (e.g. 2.4Ghz, 5Ghz) update your Wi-Fi SSID and/or Wireless Password

  6. Click Save

Belong DWA0122 modem

The D W A 0122 is a flat rectangle with rounded corners and four small feet. On top is a circular area, covered with air holes.

Make sure you’re connected via wi-fi or Ethernet, and the ‘Sync’ light is a solid green colour, then follow the steps below:

  1. On your device, open an internet browser and type 10.0.0.138 into the address bar

  2. When prompted for the modem authentication username and password:

    • Enter the username ‘admin’ 

    • Enter the password ‘Belong’

  3. Click 'Sign in’

  4. From the home menu select wi-fi

  5. On the tab menu choose the wi-fi radio band you wish to change (e.g. 2.4Ghz, 5Ghz)

  6. Under wi-fi Network make your wi-fi Network name in the Network Name field

  7. Next, under wi-fi Network change your wi-fi password in the wi-fi Network Key (password) field

  8. Click Save

Belong 4353 modem 

The 4 3 5 3 is a rectangular box with an angular front surface that drops to a flat middle section, where the modem lights are.

  1. Make sure your Belong modem is plugged in and your device is connected to your Belong network.

  2. Open a new internet browser. In the URL bar enter: http://10.0.0.138 (this is your default gateway access - these details can also be found at the back or bottom of your Belong modem).

  3. Enter the username: admin and password: Belong (these can also be found at the back or bottom) of your Belong modem.

  4. Once you’re through to the next page, select ‘wi-fi’.

  5. Select ‘2.4GHz’ or ‘5GHz’ depending on which wi-fi network you want to change. Check ‘Enable’ is set to ‘On’.

  6. From here you can customise both the ‘Network Name’ (SSID) field and ‘Network Key’ (password) field.

  7. Scroll down and click ‘Apply’.

Sagemcom F@st 4315

The 4 3 1 5 is a rectangular box with rounded corners with a base at the bottom. The modem lights are located on the the front right under the top edge.

  1. Open your web browser and navigate to 10.0.0.138 in the address bar

  2. When prompted for a username and password to login to your modem page, enter the username and password located on the back of your modem (Note: these are case sensitive)

  3. Select ‘Wireless’ on the main page

  4. From the ‘Wireless’ drop down menu select 'Basic'

  5. Customise the Network Name in the SSID field and then click ‘Apply’

  6. To customise the wireless password, select the ‘Security’ menu and edit the WPA/WAPI passphrase field then click ‘Apply’

Was this article helpful?

Still need help? Let’s talk

Call us on or go to the “Let’s chat” button at the bottom of your screen between 8am and 8pm (AEST), 7 days a week.